Why is rice said to be a “dried god”?
If you have been searching on the Internet for self-repair tips when an electronic device (such as phone, laptop, etc.) gets wet, you may have seen a popular method that has gone viral, which is “putting rice in a bucket of rice.””.
However, according to technology experts, this is just a “divine method” without real effect.
Some articles state that rice is a “hygroscopic” grain, but there is no scientific evidence to support this.
Harmless benefits
You may be wondering:Is there any harm in using rice to repair devices that are wet with water?However, many errors can occur in your calculations.
The grains of rice are very small and can get into cracks or slots on the device – places where moisture is already inside. Over time, they can produce mold. For electronic devices, mold is never a good thing.
In this case, rice will do more harm than good. It can keep moisture in your devices longer and increase the potential for corrosion. In addition, some bulges of rice grains will stress the sensitive parts of the circuit in the machine, which will make the machine inoperable.
Better not bury your phone in a bucket of rice. There are better options out there.
What do you do to fix a water wet device?
Water damage can be fixed if your device is “rescued” early and not buried in a pile of rice. Here are some simple steps you should take:
Turn off the device
Water or moisture inside can be one of the causes of electric shock to your laptop. This is very dangerous, so you need to turn off the device immediately. If possible, remove the battery and other removable parts, such as the SIM card holder (for phones). The above procedures will allow your appliances to get as much air exposure as possible, which will help them dry out.
dry stain
Gently wipe the device with a soft cloth to remove any remaining moisture. You can also wipe the device with rubbing alcohol to encourage quick drying, however, use small amounts.
Also, avoid using paper towels to soak up the water, as they can leave behind small particles, further harming your device.
hygroscopic
A handheld vacuum cleaner or a low-speed fan will help suck out any remaining moisture after drying the unit with a soft cloth. The silica packets also help absorb moisture, plus you can use an app that helps get water out of your iPhone’s speakers and microphone.
Hair dryers, microwave ovens, or artificial heat sources should not be used to dry the device, as this can cause more harm than good.
Thanks to the expert
Once the device is relatively dry, inspect it for any signs of damage. If any problems are found, take the device to professional repair services.
Even if you don’t notice anything wrong, you can still go to the experts to double check to be sure. Of course, you don’t want to spend all day thinking your Macbook is okay only to suddenly have problems due to water damage from before.
Better be careful
It is better to prevent water damage than to let it happen and then salvage it. Repairing water-soaked electronics can be very expensive, even resulting in the worst case scenario where you have to give up your device entirely.
It is best to be careful when using electronic devices near water. Devices with a resistance rating will not allow you to fall carelessly into the water.
You also need to avoid humid environments to prevent moisture from building up inside the device.