Learn about the Internet of Things


If you are looking for an easy way to learn about electronics and start building Internet of Things projects You may be interested in a new Arduino IoT package. The Arduino Internet of Things package It is specifically designed to bring together all the knowledge and tools you need to get started building your first IoT project.

Built around the Arduino Nano RP2040 Connect, the package also contains electronic components and a series of step-by-step tutorials to help you get started quickly and confidently.Says the official Arduino team. The Arduino IoT bundle is the best way to get started in the world of connected devices and features Arduino Nano RP2040 Connect boards and more for €75.

Arduino Internet of Things IoT package

Arduin IoT package

The Arduino IoT package is a perfect introduction to tinkering with your own IoT devices at home. It gives you everything you need to get started on a few simple projects, and requires very few pre-existing components and not much prior experience at all. IoT is an incredibly rich area. When it comes to building your own connected projects, there are a lot of exciting opportunities here that don’t require a huge amount of knowledge or resources to get started.”

Each package includes:

  • 1 Arduino Nano RP2040 Connect
  • 1 micro USB cable
  • 1 scoreboard of 400 points
  • 70 solid core jumper wire
  • 2 stranded connecting wire
  • 6 phototransistors
  • 3 potentiometers (10 kOhm)
  • 10 push buttons
  • 1 temperature sensor (TMP36)
  • 1 tilt sensor
  • 1 alphanumeric LCD (16 x 2 characters)
  • 1 bright white
  • 28 LEDs (1 RGB, 8 red, 8 green, 8 yellow, 3 blue)
  • 1 small DC motor (6/9V)
  • 1 small servo motor
  • 1 Piezo capsule (PKM17EPP-4001-B0)
  • 1 H Bridge Motor Driver (L293D)
  • 1 optocoupler (4N35)
  • 2 MOSFET transistors (IRF520)
  • 5 capacitors (100uF)
  • 5 diodes (1N4007)
  • 1 male pin bar (40 x 1)
  • 20 resistors (220 ohms)
  • 5 resistors (560 ohms)
  • 5 resistors (1k ohm)
  • 5 resistors (4.7 kOhm)
  • 20 resistors (10 kOhm)
  • 5 resistors (1 megohm)
  • 5 resistors (10 megohms)

Source: A.B

Filed Under: DIY Projects, Top Stories

The latest offering of geeky tools

disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. learn more.





Source link

Write a Reply or Comment

Your email address will not be published. Required fields are marked *